Daily Install Update Form

This field is hidden when viewing the form

Residential Project Type

standard_evse

tesla_wc_uwc

tesla_powershare

tesla_powerwall

base_power_company

service_upgrade

Name Of Electrician(s) Who Visited The Site(Required)

First

Last

Estimated Hard Cost for Electric Materials ($)(Required)

Please enter a number greater than or equal to 0.

Estimated Man Hours(Required)

Please enter a number greater than or equal to 0.

Example: If 2 electricians are onsite for 8hrs then it would be 16 man hours.

Is The Install 100% Completed?(Required)

Yes

(Note: "100% Completed" = NO additional trips to the install site are needed to perform additional work + All chargers are able to charge vehicles)

Date You Were At The Site?(Required)

Additional Comments Regarding Install

* Failure to provide the below photos will result in an email of NON-COMPLIANCE and put a delay on the payment process. ALL Photos must be CLEAR and in-focus, with the appropriate Personal Protection Equipment worn.*

BPC Relevant Photos From The Job(Required)

Drop files here or

Max. file size: 256 MB.

Inspection photo evidencing the condition of the existing meter can, bracketing & sockets.(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Inspection photo evidencing the condition of the existing electric main panel (bus bars) + jaw alignment prior to work commencing(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Voltage for L1-L2/ L1-Ground/ L2-Ground at the BREAKER terminals with GLOVES ON(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Voltage for L1-L2/ L1-Ground/ L2-Ground at the CHARGER terminals with GLOVES ON(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Voltage for L1-L2/ L1-Ground/ L2-Ground at the BATTERY terminals with GLOVES ON(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Voltage for L1-L2/ L1-Ground/ L2-Ground at the GATEWAY terminals with GLOVES ON(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Torque Screwdriver/Wrench or Liquid Torque Seal Strip showing Torque setting at the CHARGER + GATEWAY and BREAKER terminals(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Panel WITHOUT Dead Front to show the wire Gauge, NM-B, THHN, Copper, Breaker, Penetrations into the panel(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Charger or Bracket without the faceplate, to show proper wiring and settings (L1, L2 + Ground connected) (if applicable)

Drop files here or

Max. file size: 256 MB.

Example:

Battery terminal connections without the faceplate evidencing proper wiring and settings (L1, L2 + N + G connected) (if applicable)(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Backup Switch or Gateway 3 or 2 wiring terminations without the faceplate evidencing proper wiring and settings (L1, L2 + N + G connected) (if applicable)(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Gateway-Battery communication cable terminals on both sides of the connection(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Close up w/ AC wiring including CTs / Ferrite Cores connected + App confirmation screenshots (if applicable)

Drop files here or

Max. file size: 256 MB.

Example:

Panel with Dead Front ON with the Breaker labeled “EV Charger”(Required)

Max. file size: 256 MB.

Example:

Close up w/ entire product sticker label profiled inside the frame detailing service specs, tables, ratings, etc. for the product

Max. file size: 256 MB.

Example:

Conduit Run (Enough Photos to clearly understand the route of the full Conduit Run)(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Attic/Basement Run (Enough Photos to clearly understand the route of the full run with straps/staples showing in photos) (if applicable)

Drop files here or

Max. file size: 256 MB.

Example:

J-box Labels with (Panel / Circuits #s / Voltage) on the Cover Plate and Open to see the joints are made up in the J-box (if applicable)

Drop files here or

Max. file size: 256 MB.

Example:

Penetrations in the Building that are sealed with the appropriate Sealant to provide weather protection (if applicable)

Drop files here or

Max. file size: 256 MB.

Example:

Charger Serial Number (usually on the side/back), capture MAC, Model & Part #s if applicable.(Required)

Max. file size: 256 MB.

Example:

Gateway Serial Number (on front cover), capture Part #s + QR(Required)

Max. file size: 256 MB.

Example:

Smart Charge America "Bug" / Tag Sticker showing "For Service" Contact SCA

Max. file size: 256 MB.

Example:

Commissioning Photos and/or Pamphlet w/ WPA2 password (Screenshot from mobile device where applicable)(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Charge Simulator (Photos of EVSE or Vehicle plugged into the charger to show that the charger is working properly) TESTING Confirmation Screenshots(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Sheetrock Repair (if applicable)

Drop files here or

Max. file size: 256 MB.

Example:

Pullback photos of ALL backed up load centers, deadfront removed, include any downstream panels(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Provide System screenshot from mobile device showing most up to date version of software is installed on App, Charger, Gtw and inside EV(Required)

Drop files here or

Max. file size: 256 MB.

Example:

GW3V - Provide System Page screenshot from mobile device showing successful Wall Connector pairing w/ the Gateway(Required)

Max. file size: 256 MB.

Example:

GW3V - Settings Page screenshot from mobile device showing Grid Code set to "Powershare" and Solar installation set, all w/ Green checkmarks(Required)

Max. file size: 256 MB.

Example:

GW3V - Home Page screenshot from mobile device showing system running successfully(Required)

Max. file size: 256 MB.

Example:

Photo of meter socket with new wiring connected showing torque marks(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Photo of panel interior with new wiring connected showing torque marks(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Photo at first means of disconnect (Main panel) showing bonding screw and bonding jumper in place

Max. file size: 256 MB.

Example:

Grounding rods including connection on both ends(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Intersystem Bond Bridge(Required)

Max. file size: 256 MB.

Example:

Photo showing functioning SPD in main panel

Max. file size: 256 MB.

Example:

Photo of Mounting Brackets bolted/secured to fixed surface evidencing proper leveling & clearances prior to installation

Max. file size: 256 MB.

Example:

Completed weathersealing between panel and wall (if applicable)

Drop files here or

Max. file size: 256 MB.

Example:

* Please upload relevant photos from the job on the indicated day you were there, even though the job is not finished .*

Relevant photos from the Job(Required)

Drop files here or

Max. file size: 256 MB.

Example:

Final photos of the device, final & cleaned site standing 15' back(Required)

Max. file size: 256 MB.

Example:

Daily Install Update Form